Operation 4 4.3.2 Monitoring the machine during operation Engine damage due to fault which has not been remedied. The fault must be remedied before restarting the engine and operating the machine again. If the battery charge indicator (11/22) or the engine oil pressure indicator lamp (11/31) lights up, switch off the engine immediately and determine the cause. If necessary, call for service personnel. 25 If the permitted coolant temperature (11/25) is exceeded, stop work, open the engine hood and keep the engine running at idle speed to allow it to cool down. 22 P 31 + - 00014,0 h 12 Km/h 32 0 4/4 1/2 Once the engine has cooled down, turn it off and determine the cause of overheating.
If necessary, call for service personnel. If the air filter service indicator lamp (11/32) lights up, perform the necessary air filter maintenance. 4.3.3 Switching off the engine Fig. 11 Monitoring and switching off the engine Attention Do not switch off the engine when running at full throttle, but allow it to run for a short time without load at low idle-running speed. Turn the ignition key to "0". The engine stops automatically. 41/112 TL160 Operating Manual 12.9.08 Version 1.0