INSTRUMENTS AND CONTROLS 2 - ELECTRIC OUTLET An electric outlet is positioned on the right side of the cab inner wall for the connection of a lighting device for routine and maintenance operations. It is a two-pole outlet and is in compliance with the ISO 4165- 1979 standard. Power supply 12 V. RWA07250 3 - ACCUMULATOR DISCONNECTION SWITCH (if provided) This is a removable lever-type switch positioned near the ac- cumulator; to reach it, it is necessary to open the engine hood (see "3.5.1 ENGINE HOOD"). The current transmitted by the accumulator to the electric sys- tem of the machine can be interrupted by rotating the switch clockwise (position B).
Always rotate the switch to “position B” if it is necessary to work on the accumulator or the electric system, or if electric welds must be carried out on the machine. The electric contact can be restored by rotating the switch an- ticlockwise (position A). 75