11. EXPLANATION OF COMPONENTS 7. HORN BUTTON When the button in the center of the steering wheel is pressed, the horn will sound. 8. HAZARD LAMP SWITCH AE061220 WARNING Use the hazard lamps only in emergencies. Using the hazard lamps when traveling will cause problems for other machines. This switch is used in emergencies, such as when the machine breaks down. ON: All turn signal lamps flash. REMARK When this switch is turned to the ON position, the turn direction indicator lamps and turn indicator pilot lamp flash, and display lamp 1 lights up at the same time. 9.
KICKDOWN SWITCH When the speed control lever is in 2nd, and the switch at the top of the knob of the lift arm control lever is pressed, the gear will shift down to 1st. This switch is used to increase the drawbar pull in digging operations. REMARK To cancel the kickdown switch, move the directional lever to REVERSE or NEUTRAL, or move the speed control lever to any position except 2nd. It is also possible to cancel the kickdown switch by operating the parking brake switch or by turning the starting switch OFF. AE060860 2-17