11. EXPLANATION OF COMPONENTS 17. HOLD SWITCH To fix the gear shift range when using automatic gear shifting, press the switch at the side of the lift arm control lever knob. The speed range displayed on the transmission indicator on the main monitor is fixed, and the HOLD display lights up. If the switch is pressed again, the HOLD function is canceled and the display goes out. Use this function to set to the desired speed range when traveling uphill or downhill, or when carrying out grading. REMARK If the gear shifting operation is carried out with the gear shift lever, it is possible to shift down or shift up the fixed speed range. 18.
STEP LIGHT SWITCH This is used to light the left rear step and ladder. If the operator presses this switch when getting off the machine, the lamp lights up for about 1 minute, then goes off automatically. 19. ENGINE EMERGENCY STOP SWITCH (Machine equipped with electrical governor) WARNING Never use this switch when stopping the engine normally. After using it, return it to the normal position when the engine has stopped completely. Use this switch when it is impossible to stop the engine by turning the starting switch OFF. Position a : Normal position Position b : Emergency stop position 2-21