11. EXPLANATION OF COMPONENTS 11.13 FUSE NOTICE Before replacing a fuse, be sure to turn off the starting switch. The fuses protect the electrical equipment and wiring from burning out. If the fuse becomes corroded, or white powder can be seen, or the fuse is loose in the fuse holder, replace the fuse. Replace a fuse with another of the same capacity.
Fuse capacity and name of circuit PC450-ENG 2-34 No Fuse capacity Name of circuit y 10 A Governor and pump controller x 10 A Solenoid valve c 20 A Air Conditioner (Motor) v 20 A Lamp (Deck left hand, Deck right hand, Boom left hand, Boom right hand) b 20 A Cigar lighter, Air conditioner (control), Heater, Window washer, Left knop switch n 10 A Horn m 15 A Wiper motor controller h 20 A Lamp (Cab x 3) i 20 A Lower wiper, Refuelling pump j 10 A Key switch signal k 15 A Lamp (Counterweight, Heated seat) l 10 A Engine room lamp m 10 A Alarm buzzer, Monitor n 20 A Battery relay, Start signal o 10 A Roomlamp, Radio p 10 A Spare fuse q 10 A Spare fuse r 10 A Spare fuse s 20 A Spare fuse