Deutz — Removal

GEARBOX OIL/FUEL COOLERS GEARBOX OIL/FUEL COOLERS Removal 1 - Remove the side panels. 2- Disconnect the inlet and outlet pipes (2) and (3) from the fuel cooler (1). Label the pipes and fittings to avoid confusion on reconnection. 2 3 1 F0017460 3 - Disconnect the inlet and outlet pipes (5) and (6) from the oil cooler (4). Label the pipes and fittings to avoid confusion on reconnection. Plug the open ends of the pipes to prevent mois- ture getting into the system. 6 5 4 F0078190 4 - Loosen the knobs (7) securing the upper cowling (8) of the heat exchangers assembly (9); remove the cowling. 8 9 7 F0078200 5 - Remove the two bolts (10) supporting the coolers (9). 9 10 F0078210 30-45