DX225LC-3 Safety 1-26 ROPS Certification This DOOSAN excavator has an operator's cabin that meets ROPS requirements. The seat belt must be worn for rollover protection. The ROPS certification plate (Figure 19) is found on the left side of the cabin on most models. It may vary slightly in its location on some models. Check the ROPS cabin, mounting, and hardware for damage. Never modify the ROPS cabin. Replace the cabin and hardware EX1300529 if damaged. See your DOOSAN distributor for parts. Figure 19 ROPS Roll-over Protective Structure complies with ISO 12117-2:2008, EN 13531:2001.
WARNING AVOID DEATH OR SERIOUS INJURY Never modify the operator cabin by welding, grinding, drilling holes or adding attachments unless instructed in writing by DOOSAN. Changes to the cabin can cause loss of operator protection from rollover and falling objects, and can result in death or serious injury. EX1300529 EX1300529