Seat Belt Check seat belt daily for correct function. Inspect seat belt system more often if machine is exposed to severe environmental conditions or applications. Conduct the following inspections and replace seat belt system as necessary: 1. Check webbing. If system is equipped with a retractor, pull webbing completely out and inspect full length of webbing. Look for cuts, wear, fraying, dirt and stiffness. 2. Check buckle and latch for correct operation. 3. Make sure latch plate is not excessively worn, deformed or buckle is not damaged or casing is broken. 4. Check retractor web storage device (if equipped) by extending webbing and checking that it spools out and retracts correctly. 5.
Check webbing in areas exposed to ultraviolet (UV) rays from sun or extreme dust or dirt. If original color of webbing in these areas is extremely faded and/or webbing is packed with dirt, webbing strength may be reduced. NOTE: Contact your DOOSAN distributor for seat belt system replacement parts. WARNING AVOID DEATH OR SERIOUS INJURY Failure to properly inspect and maintain seat belt and seat belt system can cause lack of operator restraint and can result in death or serious injury. Before fastening seat belt, check that there is no problem in belt mounting bracket. If it is worn or damaged, replace seat belt. Fasten seat belt so it is not twisted.
Always wear seat belt when operating machine. Safety 1-35 DX225LC-3