GENERAL Table 1-1 Specifications of L2A, L2C and L2E (2 / 4) 1-8 Engine model L2A L2C L2E Lubrication system Lubrication system Pressure feed, full flow filter system Engine oil Speci fication API service category CF and CF-4 Capacity (engine total) Upper limit: 2.0 L [0.53 U.S. gal]/ Lower limit: 1.2 L [0.32 U.S. gal] (Upper limit: 2.5 L [0.66 U.S.gal]/ Lower limit: 1.7 L [0.45 U.S. gal]) Oil pump Type Gear type (internal and external teeth engagement), built into gear case Discharge rate 3 L [0.79 U.S.
gal]/min or more (at 1000 min-1) Relief valve Type Plunger valve type Valve opening pressure 0.29 ± 0.029 MPa {3.0 ± 0.3 kgf/cm²} [42.68 ± 4.3 psi] (1000 min-1) Oil filter Type Paper-element cartridge Cooling system Cooling system Forced-feed circulation type Coolant capacity (main unit of engine) 1.2 L [0.32 U.S. gal] Water pump Type Centrifugal volute type Discharge rate 50 L [13.21 U.S. gal]/min (at pump rotation of 4500 min-1) Thermostat Type Wax pellet Valve opening pressure 76.5 ± 1.5°C [169.7 ± 2.7°F] Cooling fan Type Suction (PP fan) No. of blades/ Outside diameter 4 variable pitch blades/260 mm [10.24 in.] Inlet system Air cleaner Type Paper element