2. CONTROLS 2.14 TWO SPEED CONTROL (NOT AVAILABLE ON ALL MODELS) A switch located on the LH steering control lever (Fig. 2.14A) is used to alternately activate the loader’s Two- Speed function. Pressing and releasing the switch will activate the Hi-speed function. Pressing and releasing the switch a second time will return the loader to the Low- speed function. When the loader ignition is turned to the “OFF” position, the Two-Speed control returns to the Low-speed function. An indicator panel is mounted on the LH ROPS post (Fig. 2.14B) to show the operator which function is activated at any given time.
For proper loader operation, always select the loader speed function which is best suitable for the existing work environment. NOTE: Always drive the loader at speeds compatible with safety, especially when operating over rough ground, unfamiliar terrain, when crossing ditches or when turning. C3907 Fig. 2.14B 21 CONTROL HANDLE TWO SPEED HI / LOW BUTTON (Not available on all models) ROPS SIDE SEAT SIDE C3015 Fig. 2.14A C3015 Fig. 2.14A