1-5 BATTERY ASSY REMOVAL·INSTALLATION Always remove or install the battery in no-load state (without any load on the fork). 3 1 1 6 5 Removal Procedure 1 Disconnect the battery plug. 2 Slide the operator’s seat to the front most position, and lift up the armrest. (Mini lever/Joystick lever) 3 Open the battery hood. 4 Remove the rear toe board. 5 Loosen battery stoppers (RH and LH) and the fixing bolts. 6 Remove the battery ASSY. [Point 1] Installation Procedure The installation procedure is the reverse of the removal procedure. Point Operation [Point 1] SST Removal Installation: SST 25009-13201-71