CONTROLS AND INSTRUMENTS The headlight high beam comes on and goes off each time the switch is raised and released with the light switch in either "OFF" or the first stop position. To give a signal of overtaking, operate the lever repeatedly so that the headlights flash in the daytime and at night the high and low beams come on alternately. Passing light switch The headlight beam is alternately switched from high to low or low to high each time the switch is raised. The headlight high beam indicator on the instrument panel lights up when the headlights are on high beam.
- 2–23 - Dimmer switch Move the switch in the direction of the turn being made so that the external turn signal lights operate and the turn signal indicator light on the instrument panel flashes. The switch returns automatically to the neutral position when steering wheel is returned to a straight-ahead position. When the headlights and a turn signal light are both turned on, the cornering light will automatically come on. Turn signal switch Cornering light V