Text-module The basic principle of this documentation is that the different tractor types are divided into main assem- blies, which correspond to the FENDOS structure with a few exceptions for technical reasons. These main assemblies are, for example, "0000 - Tractor/General system" ; "1000 - Transmission"; "2000 - Engine", etc. The main assemblies are sub-divided into subassemblies, e.g. "1005 - Transmission control unit"; "1220 - Live PTO", etc. Please see document 0000 A 000009 for an overview of the assemblies. Each assembly is subdivided into various registers which are labelled with an index letter. These are as follows.
A - General E - Measuring and testing B - Faults F - Settings and calibration C - Documents and plans G - Repairs D - Position of components H - Service - Information This documentation is made up of a large number of self-contained individual documents (=worksheets). These documents can be used for various applications and are available in different languages. Each document is given a unique document code (8), which is made up of the chapter no. (1) (=assembly / subassembly), the index letter (2), and the document no. (3), printed on the right of the footer. A document can, therefore, be clearly assigned to a main assembly/subassembly and the index. Explanation of the header and footer:
PM-Picturemodule PMTAB_Picture Text-module a Index letter d Validity: chassis no. b Chapter / section e Other notes on validity c Type validity PM-Pictur General All types Documentation structure A Date Version Page Documentation structure Capitel Index Docu-No. 12.4.2000 b 1/2 0000 A 000011