. SAFETY SAFETY MACHINE OPERATION SAFETY MACHINE OPERATION 2 - 19 STARTING ENG If t here is a warnin g tag hanging from t he work equipme lever, do not start t he engine or touch t CHECKS BEFORE STARTING ENGINE tarting the engine at the beginning of the day's work. he window glass to ensure a good view. Carry out the follow ing checks before s tarting the engine at the beginning of the day's wor Remove all dirt f rom the surface of t he window glass t o ensure a good view. Remove all dirt f rom the surface of t he lens of the fro nt lamps and working lamps, and check that they light up correctly.
Check the coola nt level, fuel level, a nd oil level in engi ne oil pan, check for clogging of th e air cleaner, and check for damage to th e electric wiring. Adjust the operat or's seat to a positio n where it is easy to carry out operations, and check that there is no damage or wear to the se at belt or mounting Check the opera tion of the instrume levers are all at t he Neutral position. Before starting t he engine, check th at lock lever (1) is position (L). s so that the rear of the machine can Adjust the mirror f the machine can clearly from the operator's seat.
When adjusting, see "Rearview Mirr ors (PAGE 3-68)" Check that there are no persons or obstacles above, in the area around the machine. in t he area aroun