102 Maintenance 2 Separate the filter and the bowl. Note: Always dispose of fuel according to Federal or local regulations. Take all waste fuel to a recycling or waste collection center. 3 Clean and dry the bowl. Attach it to a new filter. Use new seals at both bowl and filter head joint. Install both on the filter head in the vehicle. CAUTION Never fill filter with fuel before installing. Contaminated fuel causes accelerated wear to fuel system components. 4 To eliminate air from the filter, operate the primer pump to draw fuel and fill the filter. 5 WARNING DO NOT work near the fan with the engine running. The engine fan can engage at any time without warning.
Anyone near the fan when it turns on could be seriously injured. Before turning on the ignition, be sure that no one is near the fan. Start the engine and check for leaks. Correct any leaks with the engine stopped.