OPERATOR CONTROLS AND EQUIPMENT OPERATOR CONTROLS 1. Steering Wheel 4. Horn/Telescope Adj. 9. Cigarette Lighter 2. Turn Signals 5. Hoist Control 10. Ash Tray and Dimmer Switch 6. Retarder Pedal 11. Range Selector 3. Steering Wheel 7. Service Brake Pedal 12. DO NOT SHIFT Tilt Lever 8. Throttle Pedal Light Not Shown - HAZARD Flasher Switch below Steering Wheel (1) STEERING COLUMN AND CONTROLS The steering column will tilt up and down and telescope in and out to provide a comfortable drive position for the operator, or move up and away for easy entry and exit. (2) DIMMER SWITCH AND TURN SIGNALS The dimmer switch is located in the turn signal lever.
If headlights are on low beam, pulling the lever toward the steering wheel will change headlights to high beam. Pulling the lever again changes headlights back to low beam. Turn signals lights are activated by moving the lever "up" to activate right turn lights, and moving the lever "down" for left turn lights. HB4021 6/95 Operator Controls HB4-1