(7) SERVICE BRAKE PEDAL The Service Brake Pedal is the middle pedal of the three pedals. It controls a dual hydraulic valve, which applies both the front dry disc brakes and the rear wet disc brakes. The service brakes should be used to slow or stop the truck whenever safety and/or truck speed/load conditions exceeds the capability of the retarder. (8) THROTTLE PEDAL The Throttle Pedal is the right pedal of the three pedals. The operator increases engine RPM by depressing the throttle pedal. Engine RPM is decreased by releasing the pedal. (9) LIGHTER Used for lighting cigars/cigarettes. Always use CAUTION with smoking materials.
(10) ASH TRAY Used for extinguishing and depositing smoking materials. DO NOT use for flamma- ble materials such as paper wrappers. Be certain that all fire ash is extinguished. (11) RANGE SELECTOR The lever-type range selector has nine positions ( R2, R1, N, D, 5, 4, 3, 2 and 1 ). To change positions, release the range holding mechanism (below knob) on the lever, and move lever to the desired range. "N" NEUTRAL - used when truck is stopped/parked with engine operating, and when starting engine. The truck cannot be started unless the Range Selector is in NEUTRAL position. 11. Range Selector Knob 12. DO NOT SHIFT Light RANGE SELECTOR HB4-4 Operator Controls HB4021 6/95