RESET PROCEDURE - When the DO NOT SHIFT LIGHT and/or CHECK TRANS light (on instrument panel) comes "On", the system can be reset. To reset, bring the vehicle to a stop at a safe location and shutdown engine. Wait about 10 seconds and restart engine. If the problem is temporary, the DO NOT SHIFT (12) and CHECK TRANS lights will not come back "On" and the truck can be operated in a normal manner. If the problem causing the DO NOT SHIFT light is still present when the engine is restarted or comes again in operation, notify maintenance personnel. OPERATOR SEAT The operator’s seat provides a fully adjustable cushioned ride for the driver’s comfort and ease of operation.
The seat is independently mounted from the cab for easy maintenance and repair. Adjustment The following adjustments must be made while sitting in the seat. 1. To adjust fore/aft location of seat: a. Raise adjustment lever "Lift to Slide" (2, Seat Adjustment). b. Move seat backward or forward as desired. 2. To adjust seat height: a. Depress the "Height Adjust " lever (1). b. Adjust seat assembly to desired height. SEAT ADJUSTMENT 1. Height Adjust Lever 3. Weight Adjust Knob 5. Cushion Tilt latch lever 2. Fore/Aft Adjust Lever 4. Weight Indicator HB4-6 Operator Controls HB4021 6/95