MACHINE OPERATION SAFETY PRECAUTIONS After the truck engine is started and all systems are functioning properly, the operator must follow all local safety rules to insure safe machine operation. If any of the red warning lights come "On" or if any gauge reads in the red area during truck operation, a malfunction is indicated. Stop truck as soon as safety permits, shut down engine if problem indicates and have problem corrected before resuming truck operation. 1. Always sound the warning horn before moving the truck. When backing the truck, give back-up signal (three blasts on air horn); when starting forward, two blasts on air horn.
These signals must be given each time the truck is moved forward or backward. Look to the rear before backing the truck. Watch for and obey ground spotter’s hand signals before making any reverse movements. Spotter should have a clear view of the total area at the rear of the truck. 2. Operate the truck only while properly seated with seat belt fastened. Keep hands and feet inside the cab compartment while truck is in operation. 3. Check gauges and instruments frequently during operation for proper readings. 4. Observe all regulations pertaining to the job site’s traffic pattern. Be alert to any unusual traffic pattern. Obey the spotter’s signals. 5.
Match the truck speed to haul road conditions and slow the truck in any congested area. Keep a firm grip on steering wheel at all times. 6. Do not allow engine to run at "Idle" for extended periods of time. 7. Check parking brake periodically during working shift. Use parking brake for parking only. Do not attempt to apply parking brake while truck is moving! 8. Check brake lock performance periodically for safe loading and dump opera- tion. 9. Proceed slowly on rough terrain to avoid deep ruts or large obstacles. Avoid traveling close to soft edges and the edge of fill area. 10. Truck operation requires concentrated effort by the driver.
Avoid distractions of any kind while operating the truck. HB6-4 Operating Instructions HB6004 4/94