Terex TA40 OCDB (A820) — Terex TA40 Articulated Dump Truck Maintenance & Service Manual (EN)

ENGINE - Engine and Mounting Section 110-0030 SM - 2676 43 26 27 24 1 14 16 34 35 17 33 12 20 37 36 41 15 13 40 39 38 9 8 28 2 7 10 8 29 21 25 23 22 8 31 32 28 3 18 LH 19 RH ON ENGINE LHS 9 10 30 31 42 4 5 32 6 1 - Engine 2 - Oil Filter 3 - Coolant Filter 4 - Primary Fuel Filter 5 - Secondary Fuel Filter 6 - Dipstick 7 - Engine Coupling 8 - Snubbing Washer 9 - Washer 10 - Nut 11 - Bolt 12 - Bolt 13 - Bolt 14 - 'V' Belt 15 - Bolt 16 - Plate 17 - Screw Assembly 18 - Rear LH Mount 19 - Rear RH Mount 20 - Link 21 - Bolt 22 - Bushing 23 - Connector 24 - Link 25 - Washer 26 - Bolt 27 - Lockwasher 28 - Isolation Mount 29 - Bolt 30 - Step 31 - Lockwasher 32 - Bolt 33 - Washer 34 - Nut 35 - Pin 36 - Bolt 37 - Washer 38 - Bolt 39 - Washer 40 - Locknut 41 - Locknut 42 - Clip 43 - Alternator Fig.

1 - Engine and Mounting DESCRIPTION Numbers in parentheses refer to Fig. 1. There are two full-flow oil filters (2) mounted on the right hand side of engine (1) in a downward position. The filters are of the throw away, spin-on type. Oil supplied by the engine oil pump passes through oil filters (2) before reaching the various moving parts of engine (1). The oil is forced by pump pressure through a passage in the filter adaptor and into the elements. Impurities are filtered out as the oil passes through the elements and out through another passage in the filter adaptor. For engine make, model and specification, refer to Section 000-0000, GENERAL INFORMATION.

For engine servicing and repair data refer to the engine manufacturers service manual. The engine is mounted to the tractor frame at three points by a mounting bracket at the front of engine (1) and two rear mounts (18 & 19). Rubber isolation mounts (28) through engine mounts provide sufficient flexibility to absorb varying engine vibration and torsional loads. Engine coolant filter (3) and conditioner is a compact bypass type unit with a replaceable spin-on type element mounted on the gear case cover at the front right hand side of engine (1). Refer to Section SM 2121 Rev 1 11-03 1