INTRODUCTION! IINSP I Ml.1 PERIODIC MAINTENANCE TABLE ADJ. PERIODIC INSPECTIONS AND ADJUSTMENTS INTRODUCTION This chapter includes all information necessary to perform recommended inspections and adjustments. These preventive maintenance procedures, if followed, will ensure more reliable machine operation and a longer service life. In addition, the need for costly overhaul work will be greatly reduced. This information applies to machines already in service as well as new machines that are being prepared for sale. All service technicians should be familiar with t!lis entire chapter.
PERIODIC MAINTENANCE TABLE Initial Pre-operation 1 Month Item Remarks or check (Daily) 800 km (500 Mi) (40 hr) Every Seasonally or 3,200 km (2,000 Mi) (160 hr) Spark Plug: Check condition adjust the gap and clean. Replace if necessary. Check oil level. Engine Oil: ... Air bleed the oil pump if necessary. ... Oil Filter: Check condition . Replace if necessary. - ~ Fuel: Check fuel level. ... Fuel Filter: Check condition . Replace if necessary. ... Fuel Line: Check fuel hose for cracks or damage . Replace if necessary. ... Oil Line: Check oil hose for cracks or damage . Replace if necessary. Check coolant level. Engine Coolant Check throttle lever operation.
Carburetor Whenever operating condition ... Adjust the jets., (elevation/temperature) is changed. ... Air bleed the cooling system if necessary. Check wear and damage. Replace if necessary. ... Water Pump Belt Manual Starter: Check operation and rope damage. ... Replace if necessary. Adjust water pump belt if necessary. Engine Stop Switch: Check operation ... Repair if necessary. Throttle Override System: Check operation. ... Repair if necessary. Throttle Lever: Check operation. ... Repair if necessary. ... Exhaust System: Check for leakage . Retighten or replace gasket if necessary . ... Decarbonization: More frequently if necessary. Drive V-belt Guard: Check cracks, bends or damage. ...
Replace if necessary. Drive V-belt: Check wear and damage. Replace if necessary. Drive Track/Idler Wheels: Check deflection, wear and damage. ....... ... Adjust/replace if necessary. Check wear and damage. ... Replace if necessary. Slide Runner ... : It is recommended that these items be serviced by a Yamaha dealer or other qualified mechanic . ...... : Perform after 1 Month or 50 km (31 Mi) (2hr) and every 1 Month or 400 km (250 Mi)(20 hr). 2-1 http://ReadManuals.com