SIDE COWLING/SPARK PLUG I rgf I Q.I SIDE COWLING Removal 1. Open the shroud. 2. Remove: • Screws CD 3. Remove: • Side cowlings (left and right) CD Pull it forward [AI Installation Reverse the uRemoval" procedure. ENGINE SPARK PLUG 1. Remove: • Spark plug 2. Inspect: • Electrode CD Wear/Damage~Replace. • Insulator color ® 3. Measure: 377-000 • Plug gap @ Out of specification~Regap. Use Wire Thickness Gauge. Spark Plug Gap: 0.7 .. 0.8 mm (0.028 .. 0.032 in) Clean the plug with a spark plug cleaner if necessary. Standard spark plug: BR9ES (NGK) Before installing a spark plug, clean the gasket surface and plug surface. 2-3 http://ReadManuals.com