________________________ O_IL_PU_M_plr&sl4il1 7. Disconnect: • Oil delivery hoses CD 8. Feed the "Yamalube 2-cycle oil" into the oil delivery hosesCDusing a oil can®forcomplete air bleeding. 9. Connect: • Oil delivery hoses CD 10. Remove: • Bleed screw CD • Gasket (bleed screw) 11. Keep the oil running out until air bubbles disappear from bleed hole. • Gasket (bleed screw) CD Wear/Damage ~ Replace. 13. Install: 12. Inspect: • Gasket (bleed screw) • Bleed screw ® Cable Adjustment NOTE: ______________________ __ Before adjusting the oil pump cable, the throttle cable free play should be adjusted. 1. Pull back the adjuster cover CD . 2. Adjust: Oil pump cable Adjusting steps:
• Loosen the locknut CD . • Hold the throttle lever at full-throttle position. • Turn the adjuster ® in or out until the adjust- ment mark@is aligned with the end @ofthe adjuster. • Tightenthe locknut and install the rubbercaps from both sides. 3 2-5 http://ReadManuals.com