COOLING SYSTEM I ~8S Ifill 9. Disconnect: • Coolant hoses (rear) CD 10. Drain the coolant. NOTE: ______________________ __ Lift up the front ofthe machine to drain the coolant completely. AWARNING Coolant is poisonous. It is harmful or fatal if swallowed. If coolant is swallowed, induce vomiting immediately. Get immediate medical attention. If coolant splashes in eyes, flush with water. Call a physician. If coolant splashes on skin or clothes, wash immediately with soap and water. 11. Remove the reservoir tank CD and drain the coolant. 12. Install: • Reservoir tank 13. Inspect: • Gaskets (drain bolt) Damage---+Replace. 14. Install:
• Gaskets • Drain bolts • Exhaust pipe/gaskets Muffler Drain bolt: 32 Nm (3.2 mokg, 23 ft-lb) ~;:;;;;a" .. Bolts (exhaust pipe): 23 Nm (2.3 mokg, 17 ft-lb) 15. Fill: • Cooling system High quality ethylene glycol anti-freeze containing corrosion inhibitor Coolant and water mixed ratio: Recommended Coolant: 60% : 40% Total amount: 4.2 L (3.7 Imp qt, 4.4 US qt) Reservoir tank capacity: 0.25 L (0.22 Imp qt, 0.26 US qt) 2-9 http://ReadManuals.com