ADDITIONAL EQUIPMENT Safety 3 Inch Stainless steel 80mm (suction & discharge) 380 mmHg 2.3 kg/cm І (normal) 3.0 kg/cm І (maximum) 600 ℓ /min 600 ~ 700 min 1 EA 3 inch, 2EA, Stainless steel 3 inch, 1EA, Stainless steel Suction, Discharge, Free, Stop 3 inch, 1EA, Stainless steel 2 Ѕ , 1EA, Stainless steel 3 inch, 1EA, Stainless steel Located under each compartment T/M P.T.O Located in the cab Connected T/M P.T.O to pump Top loading (manhole) Steel + epoxy coating 4EA, Located inside of the tank Preventing loaded fluid From baffling 3EA, Located on the tank Live : 1EA, Blind :
2EA 2EA,Located both side of the tank Located in the upper part of tank Located on the manhole cover at the each compartment Located at the rear part of tank - Protector – side Function GEAR PUMP VALVES P.T.O DRIVE SHAFT TANK EQUIPMENT OTHERS Spec Material Bore size Suction pressure Discharge pressure Capacity RPM Quantity 2-way valve 4-way valve Strainer By-pass valve Bottom valve Type P.T.O Switch Loading type Material (Base) Baffle plate Manhole Hose locker Top fence Air relief valve Water supply bar UIPMENTS OPTIONAL EQ