EXPLANATION OF COMPONENTS OPERATION MANUAL TUNING Press tuning button and set to the desired frequency. Each time the button is pressed, the frequency will move up or down in steps of 9 kHz (AM) or 0.1 MHz (FM). Button A: Move to a higher frequency station Button B: Move to a lower frequency station G If the frequency reaches the top or bottom limit, it will auto- matically change as follows: top limit bottom limit, or bottom limit top limit A B AUTOMATIC TUNING Keep tuning button (5) pressed for at least 0.5 seconds. When a broadcasting station is picked up, it will automatically stop. To search for the next station, press tuning button (5) again for at least 0.5 seconds. Button A:
Move to a higher frequency station Button B: Move to a lower frequency station G If tuning button is pressed during auto tuning, the auto tuning will be canceled and the frequency at the point where it is canceled will be picked up. SETTING CORRECT TIME 1. Press display selector button (4) to display the time. After 5 seconds, the display will return to the frequency display and the time cannot be corrected. If this happens, press display selector button (4) again. 2. Press time adlustment button (8) and adjust the hour and minute. H button: Adjusts hour (advances one hour each time it is pressed) M button:
Adjusts minute (advances one minute each time it is pressed) If the H or M button are kept pressed, the time will advance continuously until the button is released. SET button: Sets to start of hour (When it is pressed, the minute returns to 00) If the minute display is between 0 and 29, and the SET button is pressed, the minute reading will return to 00. If it is pressed when the minute display is between 30 and 59, the minute display will return to 00 and the hour will advance by 1. Example 10:29 10:00 10:30 11:00 Press the H, M, and SET buttons to set to the correct time. NOTE: Ensure radio is switched off when leaving the machine for long periods to prevent draining of battery charge. 98