EXPLANATION OF COMPONENTS OPERATION 2. TONE CONTROL KNOB (TONE) Turn the knob to adjust the tone as follows. Turn CLOCKWISE to emphasize the high sounds Turn COUNTERCLOCKWlSE to sup- press the high sounds. 3. FM/AM SELECTOR BUTTON (AM/FM) Press this button and select the desired band. Each time the button is pressed, it switches AM - FM - AM... 4. DISPLAY SELECTOR BUTTON (TIME) This equipment gives priority to the frequency display. If the but- ton is pressed when the frequency is displayed, display will give the present time for 5 seconds. After 5 seconds pass, the display will automatically return to the frequency display.
If any button other than TIME SET (H, M, SET) is pressed within the 5 sec- onds, the display will return to the frequency display. 5. TUNING BUTTONS (TUNING) MANUAL TUNING (MANUAL) Use the buttons to change the frequency. Up button (.^.): Each time the button is pressed, the frequency will go up in steps (FM: 0.1 MHz, AM: 9 kHz). Down button ( ^.): Each time the button is pressed, the frequency will go down in steps (FM: 0.1 MHz, AM: 9 kHZ). 6. PRESET BUTTONS (1, 2, 3, 4, 5, 6) (PRESET STATION) If these buttons are set to the frequency of the desired broadcast- ing station, the station can be selected at a touch. For details of the method of presetting, see METHOD OF OPERATION”. 96