13. TRANSPORTATION 2. Set the travel speed switch to the Lo position. Mi O O Ww Hi Turnthe auto-deceleration switch OFF, and return the fuel control dial 3. to reduce the engine speed. 6 Lo os © O)© 4. Turn the swing lock switch ON to apply the swing lock. 5. Setin the direction of the ramps, lower the work equipment as far as possible without letting it hit the trailer, then travel slowly to load or unload the machine. When ON on the ramps, do not operate any lever other than the travel lever. 6. Load the machine correctly in the specified position on the trailer.
PC160/180/200-6k-ENG REMARK When the work equipment is installed, load the machine from the front; when the work equipment is not installed, load the machine from the rear. 2-81