11. EXPLANATION OF COMPONENTS 11.8 LUGGAGE TRAY This tray is located to the rear of the operator’s seat. Always keep the operation & maintenance manual in this box for easy reading access. 619879 11.9 ASHTRAY This is on the side of the operator’s seat. Always make sure that you extinguish the cigarette before closing the lid. 11.10 HEATER 11.10.1 1. VIEW OF CONTROL PANEL Inlet air control slider Change between internal air recirculation & external fresh air intake. Internal air circulation. Purpose oa position. 2. This is used when wishing to quickly warm the cab. [IC] External air intake.
This is used for fresh air intake or to remove condensation on windows or when the air inside the cab is stale. =] Air outlet selector slider The operator can select a suitable outlet as required. Purpose Sending air to upper area of operators seat and defrosting upper part of front window Sending air to lower area of operator’s seat and defrosting lower part of front window. PC160/180/200-6k-ENG Lever position Air outlets For complete defrosting of the front window, set the selector to the mid-point of its stroke. 2-29