ENGINE MAINTENANCE - Maintenance Procedures 5. Install the new centrifugal oil filter element onto the centrifuge base. Installing and Locking Cap Installing O-rings onto Screw Cap and Insert into Base Installing Centrifugal Oil Filter into Base 1 2 2 8. Lightly lubricate the new O-rings (1) with engine oil. 9. Fit the new O-rings (1) onto the screw cap (1) and onto the centrifuge base (2). 6. Mount the screw cap on the centrifuge base. 7. Turn the screw cap counterclockwise to lock it. 10. Position the screw cap carefully onto the oil module. 11. Tighten the screw cap by hand until it reaches the end position. 12. Tighten the screw cap to 52 lb-ft (70 N·m).
Use a hexagonal socket, or box wrench, to avoid damaging the oil filter cap. Y53-1166-1G1 (08/2018) 55