Lubrication System/Oil Pump REMOVE OIL PUMP 1. Remove engine. (See machine technical manual.) 2. Remove flywheel. (See Group 20 in this manual.) 3. Remove clip (A) to disconnect governor rod (B) from governor arm (C). M36417 -UN-29JAN90 M98,2040K,7 -19-11OCT85 IMPORTANT: Do not hit gear cover with a metal hammer or remove cover with a screwdriver. Doing so can damage gear cover. 4. Remove four cap screws and nut to remove clip (A), gear cover, and gasket (B). M36418 -UN-29JAN90 If gear cover is tight, LIGHTLY hit gear cover with a soft-hammer to loosen it. M98,2040K,8 -19-11OCT85 CTM2 (19APR90) 40-4 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495 5. Remove oil seal using a 2 in.
driver disk. -UN-29JAN90 M36302 M98,2040K,9 -19-11OCT85 40 4