Lubrication System/Oil Base NOTE: On P218G and P220G Engines the starter is not attached to the oil base. 10. Remove two cap screws to remove starter. 11. Inspect oil base for cracks, broken fins, or damage; replace if necessary. M36435 -UN-29JAN90 M98,2040K,40 -19-02FEB87 INSTALL OIL BASE NOTE: On P218G and P22G Engines the starter is not attached to the oil base. 1. Install starter and two cap screws. Tighten cap screws to 34 ± 1 N·m (301 ± 9 lb-in.) M36436 -UN-29JAN90 M98,2040K,41 -19-02FEB87 CTM2 (19APR90) 40-16 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495 2. Install a new gasket (A) on oil base. 3. Install oil base.
Install and tighten four cap screws to 27 ± 3 N·m (320 ± 27 lb-in.). -UN-29JAN90 M36415 -UN-29JAN90 M36416 M98,2040K,42 -19-26NOV85 40 16