Lubrication System/Oil Line Adapter REMOVE OIL LINE ADAPTER 1. Remove engine. (See machine technical manual.) 2. Remove three cap screws to remove lift bracket (A) and exhaust shroud (B). 3. Remove four cap screws to remove left side shroud (C). M36445 -UN-29JAN90 M98,2040K,60 -19-21OCT85 5. Remove two special screw to remove oil adapter and gasket (A). M36453 -UN-29JAN90 CTM2 (19APR90) 40-24 16, 18, 20 & 24HP Onan Engines M98,2040K,62 -19-21OCT85 AllTractorManuals.com 130495 4. Disconnect engine oil pressure sender wiring lead (A). -UN-29JAN90 M36446 M98,2040K,61 -19-21OCT85 40 24