Governor/Governor Assembly 3. Remove snap ring to remove hub (A) and cup (B). 4. Inspect cup race for grooved or rough surface. Replace cup if necessary. M36309 -UN-29JAN90 M98,2025K,15 -19-09OCT85 CTM2 (19APR90) 45-3 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495 5. Remove flyballs. Inspect flyballs for grooved or flat spots, replace if necessary. 6. Inspect flyball spacer (A) for wear or damage. Replace camshaft gear if necessary. -UN-29JAN90 NOTE: The flyball spacer, plate, and camshaft gear are serviced as an assembly only. IMPORTANT: If camshaft gear is replaced, always replace crankshaft gear also. M36310 7. Inspect camshaft gear for chipped or broken teeth.
Replace camshaft gear if necessary. M98,2025K,16 -19-09OCT85 45 3 IMPORTANT: Be sure to hold camshaft while removing camshaft gear. 8. Remove gear using a 1 in. deep-well socket, 1 in. driver disk, and a press. -UN-14JUL89 9. Remove key. M30688 M98,2025K,17 -19-11NOV85 IMPORTANT: Be sure to hold camshaft while removing camshaft gear. 8. Remove gear using a 1 in. deep-well socket, 1 in. driver disk, and a press. -UN-14JUL89 9. Remove key. M30688 M98,2025K,17 -19-11NOV85 3