Group 55 Stator and Rectifier—Regulator SPECIFICATIONS Item Measurement Specification Lift Bracket Cap Screw Torque 11 ± 3 N·m (97 ± 27 lb-in.) B43E, B43G, B48G, T260 Engine: Torque 51 ± 3 N·m (38 ± 2 lb-ft) Flywheel Cap Screw P218G and P220G Engine: Flywheel Torque 67—75 N·m (50—55 lb-ft) Cap Screw M98,2055K,1 -19-11FEB87 CTM2 (19APR90) 55-1 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495 REMOVE STATOR 1. Remove engine. (See machine technical manual.) 2. Disconnect spark plug wire and voltage regulator leads. 3. Remove cap screws to remove lift bracket (A) and manifold cover (B). 4.
Remove four cap screws on T260, P218G, or P220G engine; five cap screws on B43E, B43G, B48G engine to remove side shroud (C). -UN-29JAN90 M36445 M98,2055K,2 -19-02FEB87 55 5. Loosen hose clamp (A) to disconnect fuel impulse line 1 (B). -UN-29JAN90 M36290 M98,2060K,6 -19-05NOV85 5. Loosen hose clamp (A) to disconnect fuel impulse line (B). -UN-29JAN90 M36290 M98,2060K,6 -19-05NOV85 1