Stator and Rectifier—Regulator/Replace 12. Install side shroud (C). Fasten with four cap screws on T260, P218G, and P220G engine; five cap screws on B43E, B43G, or B48G engine. 13. Install manifold cover (B) and lift bracket (A). Fasten with three cap screws on T260 engine; two cap screws on B43E, or B48G engine. Tighten lift bracket cap screw to 11 ± 3 N·m (97 ± 27 lb-in.). 14. Connect spark plug wire and voltage regulator leads. Install the two stator leads on “AC” terminals and the battery lead on “B+” terminal of voltage regulator. 15. Install engine.
(See machine technical manual.) M36445 -UN-29JAN90 T260 Engine Shown M98,2055K,9 -19-02FEB87 CTM2 (19APR90) 55-6 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495 REPLACE RECTIFIER-REGULATOR 1. For T260 engine only, remove three cap screw (A) to remove manifold cover. -UN-25JAN90 M37239 M98,2055K,10 -19-22OCT85 55 6