Starter/Starter 2. Remove two thru-bolts. M37105 -UN-25JAN90 M98,2060K,13 -19-05NOV85 NOTE: Brush springs may snap out of the end cap when it is removed. Be careful not to lose springs. 3. Remove end cap. M37106 -UN-25JAN90 M98,2060K,14 -19-05NOV85 4. Remove two cap screws to remove negative brushes. M37107 -UN-25JAN90 M98,2060K,15 -19-05NOV85 CTM2 (19APR90) 60-7 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495 5. Remove nut to remove positive side brushes. Check all brushes for cracks or excessive wear. Replace brushes if they are worn shorter than 6.35 mm (0.25 in.). Inspect springs. Replace springs if they are weak or -UN-25JAN90 broken.
Always replace springs and brushes as a set if any are defective. M37108 M98,2060K,16 -19-05NOV85 60 7