Operation Section Seat Switch System (If Equipped) 1. Prior to operating the lift truck, be sure to understand and check the SEAT SWITCH SYSTEM. 2. While in normal operation and on level ground, select a direction with the derectional lever and with the park brake released. You will note that the truck will move slowly in the selected direction. If you lift yours hips off of the seat, within three seconds, the SEAT SWITCH SYSTEM will desengage the transmission allowing the truck to coast but not automatically stop. 3.
To restore the lift truck to normal operation, while sitting in the operator's seat depress the brake pedal to hold the lift truck, return the directional lever to the neutral position, and then reselect a direction of travel (either forward or reverse). The transmission will then re-engage. 4. If seat or seat switch replacement becomes necessary, be sure to use genuine DOOSAN Infracore lift truck parts. Lift trucks should never be operated without an operational SEAT SWITCH SYSTEM. NOTICE The lift truck is equipped with a SEAT SWITCH SYSTEM.
In normal operation if the direction lever is placed in either forward or reverse, the lift truck will move at a speed proportional to the accelerator pedal's position. If the operator leavers the seat without setting the parking brake, within three seconds after leaving the seat, the SEAT SWITCH SYSTEM will automatically disengage the transmission. The directional lever, however, will remain in that forward or reverse location although internally the transmission will have shifted into neutral. Before exiting the lift truck, the parking brake should always be applied. WHEN LEAVING MACHINE APPLY PARKING BRAKE! PARKING BRAKE IS NOT AUTOMATICALLY APPLIED. NOTE:
Some trucks may be equipped (ask your dealer if this applies to your truck) with an alarm that will sound if the parking brake is not applied when leaving the machine. 40 WARNING