Operation Section Lift Truck Controls Direction Control Lever Transmission Inching Control Pedal 1. Forward - Push the lever forward for FORWARD direction travel. Inching Control Pedal - Pushing down on the inching pedal, modulates the hydraulic pressure to the clutch packs, permitting disc slippage. Further pushing on the pedal completely relieves clutch pack pressure and applies the service brakes to stop and hold the lift truck. NOTE : The purpose of the inching control pedal is to provide precise inching control at slow travel speed, with high engine rpm. This is used for fast hydraulic lift during load approach, pickup or positioning. 2.
Neutral - Move the lever to center position for NEUTRAL. 3. Reverse - Pull the lever back for REVERSE direction travel. 43