Operation Section Before Starting the Engine Walk-Around Inspection 5. Inspect the carriage, forks or attachments for wear, damage and loose or missing bolts. Make a thorough walk-around inspection before mounting the lift truck or starting the engine. Look for such items as loose bolts, debris buildup, oil or coolant leaks and cut or gouged tires. Check condition of tires, mast, carriage, forks or attachments. Have repairs made as needed and all debris removed. Before starting the gas engine, push the accelerator pedal all the way down once and then slowly it to set the automatic choke. 1. Inspect the operator's compartment for loose items and cleanliness. 6.
Inspect the tires and wheels for cuts, gouges, foreign objects, inflation pressure and loose or missing bolts. 7. Inspect the overhead guard for damage and loose or missing mounting bolts. 8. Inspect the hydraulic system for leaks, worn hoses or damaged lines. 9. Look for transmission and drive axle leaks on the lift truck and on the ground. 2. Inspect the instrument panel for broken or damaged indicator lights or gauges. 3. Test the horn and other safety devices for proper operation. 4. Inspect the mast and lift chains for wear, broken links, pins and loose rollers. Typical Example 10. Inspect the engine compartment for oil, coolant and fuel leaks. 48