Operation Section Parking the Lift Truck Park the lift truck level, with the forks lowered and the mast tilted forward until the fork tips touch the floor. Block the drive wheels when parking on an incline. 1. Park in an authorized area only. Do not block traffic. If LP - Gas equipped, do not park near elevator shafts or any other area where LP-Gas could collect in a pocket (low area), causing a potentially dangerous condition. 5. Turn the key in the ignition switch to the OFF position and remove the key. 2. Place the transmission controls in NEUTRAL. NOTE :
If an LP- Gas equipped lift truck is stopped or parked for an indefinite or prolonged period of time, shut off the LP-Gas fuel tank valve. 6. Actuate each loading lever several times to remove the residual pressure in the respective cylinders and hoses. 3. Engage the parking brake. 7. Block the drive wheels if parking on an incline. 4. Lower the forks to the ground. Blocking the wheels will prevent unexpected lift truck movement, which could cause personal injury. 87 WARNING