. SAFETY SAFETY INFORMATION 2 - 18 Fire coming from electric wiring stem can cause fire. onnections clean and securely tightened. Short circuits in the electrical sy Always keep electric wiring c Check the wiring every day fo or replace any damaged wiri Short circuits in the electrical sy Always keep electric wiring c Check the wiring every day fo r looseness or damage. Tighten any loose connectors or wiring clamps. Repair ng. Fire coming from hydraulic line clamps, guards, and cushions are securely fixed in position. Check that all the hose and tube clamps, guards, and cushions are securely fixed in p If they are loose, they may vibra te during operation and rub against other parts.
This m ay lead to damage to the hoses, and cause high-pressure oil to spurt out, leading to fire damage or serious injur y. Explosion caused by lighting equip ment ttery electrolyte, window washer fluid, or coolant, always use lighting with If such lighting equipment is not used, there is danger of explosion that may When checking fuel, oil, ba anti-explosion specifications. cause serious injury. When taking the electrical po When checking fuel, oil, ba When taking the electrical po wer for the lighting from the machine itself, follow the in structions in this m anual.
ACTION IF FIRE OCCURS If a fire occurs, escape from the m Turn the start switch OFF to sto Use the handrails and steps to g WINDSHIELD WASHER FLUID Us e an ethyl alcohol base washer Methyl alcohol base washer liquid FALLING OBJECTS, FLYING OBJECTS AND INTRUDING OBJECTS PREVENTION On jobsites where there is a hazard that falling objects, flying objects, or intruding objects may hit or enter the operator's cab, consider the operating conditions and install the necessary guards to protect the operator. When carrying out demolition or breaker operations, install a front guard and use a laminated coating sheet on the front glass.
When working in mines or quarries where there is a hazard of falling rock, install FOPS (Falling Objects Protective Structure) and a front guard, and use a laminated coating sheet on the front glass. When carrying out the above operations, always close the front window. In addition, always ensure that by standers are a safe distance away and are not in hazard from falling or flying objects. The above recommendationsassume that the conditions are for standard operations, but it may be necessary to add additional guards according to the operating conditions on the jobsite. Always contact your Komatsu distributor for advice. consider the operating conditions a to protect the operator.
When carrying out demolition o front guard and use a laminated When working in mines or quar falling rock, install FOPS (Fallin and a front guard, and use a lami glass. When carrying out the above op window. In addition, always ens distance away and are not in objects. The above recommendationsas standard operations, but it may guards according to the opera Always contact your Komatsu d standard operations, but it may guards according to the opera Always contact your Komatsu d