. OPERATION DETAILED CONTROLS AND GAUGES WINDSHIELD (Machine equipped with cab) WARNING It is possible to stow (pull up) the front window in the roof of the operator's compartment. 3. Pull lock pins (A) at the top left and right sides of the front window to the inside to release the lock. 3 - 21 When opening or closing t he front window, bottom window, or the door, be sure to first set the saf ety lock lever to the LOCK position. If the control levers are n ot locked and touched by accident, a serious personal injury may be ca used. When opening or closing the front window, park the machine o n the flat ground, lower the work eq uipment to the ground, then stop th e engine.
When opening the front window, hold the grips securely with both hands, pull it up and do n ot release it until it clicks into the a utomatic lock catch. The pulled-up front windo w may drop under its own weight, s o be sure to lock it with the right an d left pins (A). window, hold the grips securely with both owly. When closing the front hands, and pull it down sl Opening 1. Stop the machine on level ground, lower the work equipment completely to the ground, then stop the engine. 2. Set the safety lock lever securely to the LOCK position. 1. Stop the machine on level ground, lower the work eq uipment completely to the groun d, then stop the en gine. 2.
Set the safety lock le ver securely to the LOCK positio