EBU00053 Handlebar switches EBU00056 Start switch “START” The starter motor cranks the engine when this switch is pushed. c C See starting instructions prior to starting engine (see page 6-1 for details). q w NOTE: If the starter switch is pushed with the main switch “ON” and the engine stop switch “OFF”, the starter motor will be activated but the engine will not start. To start the engine, be sure to position the engine stop switch at “RUN”. 1. Engine stop switch “ENG. STOP” 2. Start switch “START” EBU11580 Engine stop switch “ENG. STOP” Make sure that the engine stop switch is in the “RUN” position before starting the engine.
The engine stop switch controls ignition and can be used at all times to stop the engine, especially in an emergency. The engine will not start or run when the engine stop switch is turned to “OFF”. 4-2