Operating AutoPowr Transmission Set Speeds—Guidelines And Examples F2 The value of Set Speed 1 will always be at least 10% less than the value of Set Speed 2. This ensures a smooth transition between speed bands and is illustrated in the following examples. F2 50 km/h 2 RXA0053043 —UN—26APR01 NOTE: F1 refers to Forward mode, Set Speed 1 in speed band 1. F2 refers to Forward mode, Set Speed 2 in speed band 2. 1 F1 20 km/h Example 1: Maximum Forward Set Speeds are selected for each speed band. 0 5 10 15 20 30 40 50 km/h Example 2: Value of Set Speed 1 has been reduced to 10 km/h (6 mph).
Set Speed 2 value has not been changed, but the lower portion of speed band 2 has automatically decreased to meet the top end of speed band 1. Example 1 F2 50 km/h F2 NOTE: Actual set speed increase or decrease will be at least 10% of the adjusted speed band, and can range up to 12.5%. Ten percent is used in illustrations of Examples 3 and 4, and can actually differ by as much as 2.5% of the speeds shown. 2 RXA0053045 —UN—26APR01 F1 10 km/h 1 Example 3: Set Speed 2 has been reduced to 5 km/h (3 mph). Set Speed 1 automatically decreases to 4.5—4.3 km/h (2.8—2.7 mph), 10—12.5% below the new value of Set Speed 2. 0 5 10 15 20 30 40 50 Example 2 km/h Example 4:
Set Speed 1 has been increased to 20 km/h (12.4 mph), which is higher than the value of Set Speed 2. Set Speed 2 will automatically increase to 22—22.5 km/h (13.7—14.0 mph), 10—12.5% above the new value of Set Speed 1. F2 5 km/h F2 2 F1 4.5 km/h RXA0053049 —UN—26APR01 1 0 5 10 15 20 30 40 50 km/h Example 3 F2 F2 22 km/h 2 RXA0053047 —UN—26APR01 1 F1 20 km/h 0 5 10 15 20 30 40 50 Example 4 km/h OURX935,00004B9 1927AUG081/1 425 122208 PN=102 F1 2 1 F1 2 1 2 F1 1 F1 2 1