John Deere Omar287594 — Split-Screen Display—Selectable Bottom Half

Command Center Split­Screen Display—Selectable Bottom Half A bottom display option can be associated with a top display option for quick access to the option. By setting up screen associations, the same top and bottom half screens will display together whenever the selected switch is pressed. Four screen associations can be set up; one for each of the four option switches. RXA0085000 —UN—17NOV05 11:43 AM To set up screen associations, bring up the desired top­half display by pressing the option switch. Rotate Command Dial until the desired bottom­half display appears. Setup is done automatically. The bottom half of the display is selected by turning the Command Dial.

Display options are specific to tractor configuration. NOTE: To change between metric and U. S. measurements, see ”Selecting Units and Language” in the CommandCenter section of this Operator’s Manual. Information that can be displayed includes: Clock ­ Displays current time in hours and minutes. Clock can be set to display in 12­hour or 24­hour format through tractor settings. OURX935,000062D ­19­06SEP06­1/24 True Ground Speed ­ (Optional, requires radar) Ground speed as measured by the radar. RXA0085299 —UN—06DEC05 km/hr 6.5 OURX935,000062D ­19­06SEP06­2/24 Wheel (Ground) Speed ­ Ground speed as measured at the axle.

RXA0085300 —UN—06DEC05 km/hr 7.1 OURX935,000062D ­19­06SEP06­3/24 % Slip ­ (Requires Radar) Displays current wheel slippage as a percent of ground speed compared to the true ground speed. If true ground speed is not available, "­­­" will be displayed. RXA0085003 —UN—15NOV05 % 12 Continued on next page OURX935,000062D ­19­06SEP06­4/24 16­2 122208 PN=43