Operating the Tractor Transmission/Hydraulic System WarmUp Avoid operating tractor under load until transmission/hy draulic system has warmed up. Install jumper hose (A) into SCV I coupler. Shift transmission to PARK position and operate engine at 1500 rpm. On the TouchSet panel, push SCV I button (B). Turn time control knob (E) until ”C” (continuous) is displayed. On the CommandARM, place SCV I lever in extend position. A On the TouchSet panel, push SCV II button (C). Rotate time control knob clockwise until (continuous) is displayed. RXA0097035 —UN—13AUG08 On the CommandARM, place SCV II lever (G) in extend position.
On the TouchSet panel, select SCV I and turn oil flow rate knob (D) until engine is slightly loaded (approximately 7.0—7.2). Install Jumper Hose into SCV Coupler Return SCV I and II levers to neutral position after transmission/hydraulic system has warmed up. A—Jumper Hose B—SCV I Switch C—SCV II Switch D—Oil Flow Rate Knob E—Time Control Knob F—SCV I Lever G—SCV II Lever F G E RXA0097429 —UN—27FEB08 B SET LOCK SET C D TouchSet Panel G F RXA0083192 —UN—09AUG05 CommandARM OURX935,0000076 1905MAR081/1 404 122208 PN=86