Operating the Tractor Using Secondary Hand Brake—If Equipped NOTE: Secondary hand brake applies: Front brakes on tractors equipped with Independent Link Suspension Trailer brakes on tractors equipped with pneumatic brakes Restriction in shifting transmission into gear until brake is released RXA0097475 —UN—07MAR08 NOTE: Secondary hand brake is off when switch (A) is in the down (the default) position). Switch is spring loaded to off position so must be helped up to engage brake. Hand Brake Switch A—Hand Brake Switch 1. As the lever is lifted, the secondary brake will be proportionally applied with increasing braking force. 2.
When released, the lever will return to the down position and the brake will be disengaged. OURX935,0000077 1907AUG081/1 Using Mechanical FrontWheel Drive A RW13093 —UN—07DEC88 RXA0068287 —UN—27AUG03 A—MFWD Switch CAUTION: Avoid personal injury or death. Reduce speed when driving on icy, wet, or graveled surfaces. Center ON Position—engages MFWD. MFWD on under all conditions. Indicator on display console will show engagement. Ballast tractor correctly to avoid skidding and loss of steering control. Engage frontwheel drive by using ON mode, rather than AUTO mode for fourwheel braking. Top AUTO Position. Indicator on display shows MFWD engagement.
MFWD Automatically Disengages; When pressing either brake pedal At speeds above 20.5 km/h (12.7 mph) IMPORTANT: Use only AUTO or BRAKE ASSIST positions when transporting tractor. See Transport Section. MFWD Automatically Engages; When BOTH brake pedals are depressed At any speed below 19.5 km/h (12 mph) MFWD can be engaged and disengaged in all gears (forward and reverse) during operation and under full load. Switch (A) has three operating positions. Bottom BRAKE ASSIST Position—MFWD OFF except when BOTH brake pedals are depressed at speeds above 5 km/h (3 mph). OURX935,00007A3 1906DEC071/1 406 122208 PN=88