MBE 4000 SERVICE MANUAL 17.6.1.1 Test the Engine with Replaced Exhaust System Perform the following steps to determine if replaced engine exhaust system components resolved lack of power condition: 1. Start and run the engine. 2. Test drive the vehicle to ensure lack of power has been resolved. [a] If no lack of power occurred during the test drive, no further troubleshooting is required. Shut down the engine. [b] If lack of power occurred during the test drive, shut down the engine. Check for high inlet air temperature; refer to section 17.7. All information subject to change without notice. (Rev.
2007) 6SE412 0702 Copyright © 2007 DETROIT DIESEL CORPORATION From Bulletin 1–MBE 4000–07 17-19