INSTRUMENTS AND CONTROLS @ CAUTION MONITOR GROUP (Caution items) Ifanyabnormalityoccurswhilethe engine is running, the appropriate monitor lamp and the warning lamp will flash to indicate the abnormality Sr To check the monitor immediately when the engine is stopped, wait for at least 30 seconds after the * However, when the emergency steering is being operated, only the monitor will flash. The alarm buzzer will not sound, and the warning lamp will not light up. engine is stopped. @ CHECK MONITOR GROUP (Check items before start- ing) If there is any abnormality, the appropriate monitor lamp will flash.
Check the location where the monitor lamp is flashing, and carry out the checks before starting. * When the engine is started, these monitor lamps will go off even if there are abnormalities. @ METER GROUP This group consists of air pressure gauge, engine water temperature gauge, torque converter oil tempera- ture gauge,fuel gauge, speedometer, service meter and pilot display. at the same time. * Even if any monitor lamp flashes, the machine can operate, but it should be repaired as soon as possible.
@ CAUTION MONITOR GROUP (Emergency stop items) Ifanyabnormalityoccurswhilethe engine is running, the appropriate monitor lamp and the warning lamp will flash and the alarm buzzer will soundintermittentlyatthesametime. * If any monitor lamp flashes, stop the work, and repair it immedi- ately. @ WARNING LAMP The warning lamp will flash when there is an abnormality in any @) group item. The warning lamp will flash and thealarmbuzzerwillsoundwhenthere is an abnormality in any 0. group item or when the parking brake is applied, butthe directional lever is not at neutral. - 13-